Description
These pleated cartridges are manufactured from pleated polyester media for sediment, sand, grit, turbidity and suspended matter removal for general water filtration.
The polyester media is pleated around a polypropylene core for support and the end caps are immersed in a thermo vinyl plastic. This process embeds and seals each end of the pleated cartridge generating an excellent seal on the cartridge end cap.
FEATURES
- Maximum dirt/grit holding capabilities
- Pleated cartridges are reusable after flushing and rinsing
- Recommended for chlorinated water supply
- Reasonable cost
- Standard and Jumbo sizes
SPECIFICATIONS
| Part No. | Dimensions | Micron Rating | Initial PSI @ GPM | Type |
|---|---|---|---|---|
| SMF PL1005 | 2 1⁄2” x 10” (64 mm x 254 mm) | 5 | < 1 PSI @ 12 GPM (.1 BAR @ 45 Lpm) | Pleated |
| SMF PL1010 | 2 1⁄2” x 10” (64 mm x 254 mm) | 10 | < 1 PSI @ 12 GPM (.1 BAR @ 45 Lpm) | Pleated |
| SMF PL1020 | 2 1⁄2” x 10” (64 mm x 254 mm) | 20 | < 1 PSI @ 12 GPM (.1 BAR @ 45 Lpm) | Pleated |
| SMF PL10B01A | 4 1⁄2” x 10” (114 mm x 254 mm) | 1 (absolute) | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B01 | 4 1⁄2” x 10” (114 mm x 254 mm) | 1 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B05 | 4 1⁄2” x 10” (114 mm x 254 mm) | 5 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B10 | 4 1⁄2” x 10” (114 mm x 254 mm) | 10 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B20 | 4 1⁄2” x 10” (114 mm x 254 mm) | 20 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B30 | 4 1⁄2” x 10” (114 mm x 254 mm) | 30 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL10B50 | 4 1⁄2” x 10” (114 mm x 254 mm) | 50 | < 1 PSI @ 20 GPM (.1 BAR @ 76 Lpm) | Pleated |
| SMF PL20B01A | 4 1⁄2” x 20” (114 mm x 508 mm) | 1 (absolute) | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B01 | 4 1⁄2” x 20” (114 mm x 508 mm) | 1 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B05 | 4 1⁄2” x 20” (114 mm x 508 mm) | 5 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B10 | 4 1⁄2” x 20” (114 mm x 508 mm) | 10 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B20 | 4 1⁄2” x 20” (114 mm x 508 mm) | 20 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B30 | 4 1⁄2” x 20” (114 mm x 508 mm) | 30 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
| SMF PL20B50 | 4 1⁄2” x 20” (114 mm x 508 mm) | 50 | < 1 PSI @ 35 GPM (.1 BAR @ 132 Lpm) | Pleated |
Reviews
There are no reviews yet.